Changes to Step #8
Edit by Phillip Takahashi —
- Before
- After
- Unchanged
Step Lines
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Glare is where too much light is being reflected off of the item you are taking a picture of into the camera. Identify the source of light causing the glare and adjust or eliminate it. |
| + | [* icon_note] Remember to adjust glare from the view of the camera. Glare will appear differently depending on location relative to the light source. |
| + | [* black] In the pictures from the previous step, there is a large glare on the upper right corner of the screen. This glare was eliminated by raising the right front light in our studio. This changed the angle that the light reflected off the screen so that it didn't go straight into the camera lens. |
| + | [* black] The glare on the bottom of the screen was caused by the reflection of light off of our studio table. Placing a large sheet of black poster paper to prevent reflection solved the issue. This method can be used to block reflections off any surface not in the picture, but should remain out of frame of the picture. |