/
EN
/

Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by Martin Lewis —

Edit approved by Martin Lewis

Before
After
Unchanged

Step Lines

-[* black] Glare occurs when too much light, off of the object in your picture, is reflected into your camera . Identify the source of light causing the glare and adjust or eliminate it.
- [* icon_note] Remember to look through the camera's viewfinder periodically when adjusting the position of your lights. Glare will appear in different spots depending on the angle from which you are looking.
-[* black] Raising the right front lamp eliminated the glare on the LCD, but we were still left with a blown out logo. This was caused by the reflection of our own white table.
+[* black] Glare occurs when too much light, off of the object in your picture, is reflected into your camera. Identify the source of light causing the glare and adjust or eliminate it.
+ [* icon_reminder] Remember to look through the camera's viewfinder periodically when adjusting the position of your lights. Glare will appear in different spots depending on the angle from which you are looking.
+[* black] Raising the right-front lamp eliminated the glare on the LCD, but we were still left with a blown out logo. This was caused by the reflection of our own white table.
[* black] Unwanted reflections can be removed with the proper placement of a piece of poster board. Depending on your specific situation, you may use black or white. We set our black poster board on the table directly in front of the monitor, and . . .