Creating a Box

You're viewing a previously published version of this guide. View latest version

Jul 21, 2016 - 10:54:06

Feb 16, 2017 - 02:39:15 Jul 21, 2016 - 10:54:06 Jul 17, 2014 - 09:43:18 Jul 17, 2014 - 09:32:12 Jul 17, 2014 - 09:32:03 Jul 17, 2014 - 09:28:53 Jul 17, 2014 - 09:22:49 Jul 17, 2014 - 09:22:49 Jul 17, 2014 - 09:22:47 Jul 17, 2014 - 09:22:46 Jul 17, 2014 - 09:22:44 Jul 17, 2014 - 09:22:39 Jul 17, 2014 - 09:22:35 Jul 17, 2014 - 09:22:33 Jul 17, 2014 - 09:22:32

Newer

Introduction

No special skills are needed to properly construct shipping boxes: however, product appearance and box quality are important for the over presentation to customers.

Here we will walk through how to safely and effective build a cardboard box that best ensures the product will be protected and the customer will appreciate the "out of the box" experience.

What you need

Step 1 Creating a Box

Creating a Box, Creating a Box: step 1, image 1 of 1

Grab the appropriate box for the item.
Note: The box should fit the item you are shipping while leaving room for packaging material.

Step 2

Press the creased edges along the longer sides of the box.
Locate the two open ends of the box.
At each end there are two small flaps attached to the narrow sides of the box.
Press these flaps towards the inside of the box until they are perpendicular.
On the side where you folded in the two smaller flaps, locate the long and narrow flap that is flat along the outer edge.
Locate the part of the flap with a crease and fold the top portion with the crease inwards until it is perpendicular.
Fold the entire flap inwards until it is flush with the top of the box.
Fold down the rounded rectangular flap that is attached to the other flap and insert it into the slit on the side of the box.